Archive for March, 2008

Early Actions Save Many From Flood

March 28th, 2008 by Amy G Unlimited

Chris Murphy
Staff Writer

As the Spring River crested Wednesday after rising more than 15 feet in two days sweeping homes, propane tanks, canoes, pieces of road and other items downstream, Hardy Director of Public Safety Ernie Rose knew the area residents were lucky despite their losses.

“I wouldn’t change anything because no one was hurt,” he said.

Sharp County Judge Larry Brown declared the county a disaster area Wednesday morning.

On March 20, Gov. Mike Beebe declared 26 counties disaster areas due to the recent flooding. Those counties include Baxter, Benton, Boone, Carroll, Clay, Crawford, Franklin, Fulton, Greene, Hot Spring, Independence, Izard, Jackson, Johnson, Lawrence, Logan, Madison, Marion, Nevada, Newton, Randolph, Scott, Searcy, Sharp, Stone and Washington counties.

Hardy Mayor Nina Thornton said 112 homes were effected by the flood. Approximately 55 to 60 homes were seriously damaged. Two were completely destroyed and swept down the river.

There was just one rescue required in town. Two residents were taken out of their home, but went back inside and became trapped by the rising flood waters, Rose said. Hardy Fire and Rescue used a boat to rescue the couple from their home just before dark. The department also assisted Mammoth Spring in rescuing three people from an area near Saddler Falls, he said.

Hydrologist Steve Bays with the National Weather Service in Little Rock notified Thornton Monday of the storm moving into the area and the anticipated heavy rains. Thornton learned that the storm could bring five to seven inches of rain.

“I just had a feeling this was going to be really bad,” she said. “When he called me we immediately jumped into action.”

Thornton and other city employees began calling residents along the river, including those in Riverbend, informing them of the news to allow them time to gather their belongings and get out before the flood came.

The next day Rose began evacuating properties along the river.

“On Tuesday we just went down and told them they had to go,” Thornton said, adding that approximately 300 people were forced to evacuate. “I kept telling them it was going to be worse than in ‘06. When I did that, they understood because it was still fresh in their minds. Everyone cooperated, and everyone got out.”

As the waterways throughout the county rose, Sharp County Road Superintendent Dan Melbourne had his road crews shut the flood gates throughout the county, which prevent traffic from traveling on dangerous low water bridges. All of the gates were closed by 1 p.m. Tuesday afternoon.

According to the National Weather Service in Little Rock, 6.51 inches of rain fell in Hardy March 18-19. Coupled with the rain further north in Mammoth Spring (9.25 inches) and in Missouri, the Spring River traveled out of its banks.

“It came from up above us, Myatt and Warm Fork,” Thornton said.

According to the NWS Web site, by 3 p.m. Tuesday homes were evacuated along the river. At 3:09 p.m. a car was swept off the road at Williford, and the driver was rescued. At 9:14 p.m. that night the water was 2-3 feet over Highway 63 at some places. Downtown Hardy began being evacuated.

The city closed Highway 342 (Riverview Road), Wilburn Brothers Boulevard, Woodland Hills Road, Bobo Lane, Robinhood Lane, Slayton Road and parts of Highway 63 from Hardy toward Imboden.

With Sharp County OEM coordinator Gene Moore out of town for training, Melbourne, the chief deputy coordinator, set up shop at the command post at the Hardy Fire Station.

Melbourne said his assistance wasn’t needed a great deal, Rose already had the situation under control. Melbourne reported the damage as required to Little Rock.

“I did the reporting back to Little Rock, and Ernie did the rest,” he said. “Ernie did a great job. He did a great service by beginning the evacuations Monday afternoon. Everyone was prepared.”

The action stage for the river is 8 feet, flood stage is 10, moderate flood stage is 14 and the major flood stage is 16, according to the NWS. The river crested just before 7 a.m. at 22.29 feet Wednesday.

In the September 2006 flood, the river crested on Sept. 24 at 16.75 feet. There is no record of the stage of the Spring River in Hardy during the 1982 flood, but Rose said some have told him it crested in Hardy at 31 feet.

Downstream at Imboden, the river crested Wednesday at 29.15 feet. On Sept. 24, 2006, the river crested at 26.46 feet. On Dec. 3, 1982, it crested at 38.12 feet.

Rose said the flood monitoring system at the Wilburn Brothers bridge was extremely helpful during the flood.

“It helped us because we could determine how fast the water was going. It told us the water level, how fast the river was rising and let us know who we needed to notify if it kept rising like it was,” he said

The station was operational in 2006 – but only reported its information every few hours. Soon after the flood, the National Weather Service and the U.S. Geological Survey had the station upgraded to report more often. City officials and residents can even call the station to see the current level of the river.

“It was so nice,” Rose said. “It would be great if we had it at Myatt and up at Mammoth Spring.”

Rose said he thinks the 2006 flood caused the river to rise the fastest he’s ever seen. In 1982, he was in Colorado when the flood occurred.

The river used to flood yearly which kept many property owners from keeping a lot of items on the river, especially after the 1982 flood, Rose said. As years passed by with little flooding, people brought more belongings to the river.

Rose said the 2006 flood saw more campers floating downstream, but this flood brought it’s fair share of debris. He said he thinks it is that debris that caused the extensive damage.

Mayor Thornton said the city suffered approximately $2 million in damage to city property from the recent flood, including a section of Wilburn Brothers Boulevard which had large pieces of pavement swept off the road’s surface.

About $1 million is from the playground and walking trail at Loberg Park and the damages to the ballfield at Buford Beach.

The asphalt walking trail at the park was swept off the ground in some places. Some of the pieces were found downstream at Buford Beach.

At the city’s Hardy Camper Park, the office was swept away along with many brand new picnic tables in the park area.

When the river crested, eight inches of water had made its way into City Hall located next to White Oak Station on Woodland Hills Road.

Luckily, the city had thought ahead. Employees and volunteer firefighters moved out much of the city equipment including computers before the flood water made its way into the city building. Many other items that remained were moved three feet higher to avoid the water.

Church of the Wilderness on Woodland Hills Road suffered extensive damage along with Creekside Loft located nearby. Three other businesses also had major damage.

“We’re still finding stuff out on the islands,” Rose said, adding that many 4-wheelers, several camper trailers and even a couple of pickup trucks floated down the river.

Hardy wasn’t the only city to receive damage. Downtown Williford was completely submerged as the flood water from the Spring River made its way over the railroad tracks and onto Main Street. Several homes located nearby were also flooded making them uninhabitable.

Cherokee Village also flooded. In fact, the flooding was so severe in Town Center that gasoline tanks located underground behind Village Sinclair actually floated to the surface and created a gas leak. That leak caused the city to evacuate the town house area near City Hall and block all traffic near the area.

Several roads received substantial damage in the flooding in the Village. One of the most damaged areas was near the North Golf Course where the water caused pavement to sweep off the road.

In addition, the pump house of Cherokee Village Water Association was also flooded with four feet of water. Water got into the motors and the power had to be turned off. Manager Steve Rose put out a message on the radio for users to begin conserving water, but the system still lost pressure because of the usage. The loss in pressure prompted Rose to issue a precautionary boil order for all users of the system. The boil order was lifted over the weekend.

In Ash Flat, the rain, coupled with a bust in a 12 inch main caused by a lightening strike, caused the city to issue a boil order. It, too, has been lifted.

Sharp County, as a whole suffered extensive damage, Melbourne said. He estimated that nearly 75 percent of the county’s roads were damaged in the flood. The rushing water swept away material and exposed a few culverts on county roads.

“We’re just trying to take care of the dangerous places and the hazards right now,” he said.

Melbourne said he contributes the increase in damage due to the flooding being more widespread this time around. The Strawberry River didn’t rise nearly as high in 2006.

“We had damage in the south end this time and didn’t in 2006,” he said. “We had damage in Evening Shade, too (this time).”

Melbourne said some of the county’s secondary roads are rough but remain open. As of March 21, there were still a few bridges that remained impassable due to high water. They included Bear Creek Road on the Piney Creek, Griffin Bridge on the South Fork River and Molly Barn Ford and Hewlett Road both on the Strawberry River, which all had the flood gates still locked. In addition, the bridge on Big Creek Road near Ash Flat was also closed. Judge Larry Brown expected those bridges to be opened by the end of the day March 24.

“We’re still assessing some of the damage,” Melbourne said. “We’ve got at least one lane of our roads back open.”

Federal Emergency Management Agency representatives were in Hardy Thursday to see the damage and help the city plan for the future. There were also representatives from Marion Berry’s office and other politicians in the state who pledged to help the area as much as they could with federal and state aid.

Representatives from FEMA and other state and federal agencies were expected in Hardy March 24.

“Everyone looked around and assessed and told me they would help us out whatever they could do,” Thornton said.

The damage assessment is vital in determining the type of aid the area may qualify for, whether state or federal.

The city is keeping track of everything lost and volunteer hours to help with the match required for funding.

The city is now doing business out of the city fire station but still can be reached at the same phone number: 856-3811.

“We’re up and running. We’ve taken over the fire station,” Thornton said.

The City Hall building is located in a flood zone between the Spring River and 40 Island Creek which empties into the river just feet from the city building.

Thornton said she would actually like to move City Hall to avoid further damage in floods that she knows will occur on down the line.

“It’s not if. It’s when,” she said.

Source:   Villager Journal Online

12 Tips to Healthy Skin

March 21st, 2008 by Amy G Unlimited

 1.)  Wash your face daily. Do not go to bed without removing your makeup.

 

WHY?  Your face should be washed in the morning because generally people use a heavier cream at night and if this is not cleansed off in the morning, you may appear more oily throughout the day. It should be washed at night as well because things like dust, dirt and pollution collect on your skin throughout the day. Night is when your skin cells regenerate the most. If you do not remove your makeup, your skin will not regenerate itself as well.

 

2.)   Always cleanse with a double cleanse.

 

WHY?  The first cleanse works to remove dirt, debris and makeup residue. It isn’t until the second cleanse that your pores are really clean.

 

3.)   Drink plenty of water.

 

WHY?  Did you know that 75% of Americans are chronically dehydrated? Lack of water is the number one cause of daytime fatigue. The body and skin rely heavily on water to function properly. Water keeps the skin healthy, vital and attractive, in addition to aiding in many body functions. An easy formula to determine how much water you need daily is to take your body weight and divide by 2. That number, in ounces, is how much you should drink each day. For example, if you weigh 160 pounds, you would need to drink 80 ounces (ten 8 oz. glasses) of water daily.

 

4.)  Always wear sunscreen, even on cloudy days.

 

WHY?  Because UVA rays (aging rays) weaken the skins collagen and elastin fibers, causing wrinkling and sagging. These rays can penetrate glass, water and clothing. Because UVA rays make up 90 -95 % of the sun’s UV rays, you can be sure they are getting through even on cloudy days.

 

5.)  Take care of yourself from the inside out.

 

WHY?  Healthy skin begins with diet and water intake. It really is true that “You are what you eat.” Vitamins aid in healing, softening and fighting diseases of the skin. A good place to start is with Arbonne’s Smart Nutritional Hybrids, Figure 8 and our REsist Essential Fatty Acid Anti-Aging Supplement.

 

6.)  Be sure to eliminate regularly.

 

WHY? Because potentially harmful toxins and waste trapped in your body will manifest themselves in your skin. Not to mention it can lead to poor digestion and illness. Herbal Colon Cleanse and Arbonne’s Just Go! Fiber Shake coupled with plenty of water can really help.

 

7.)  Don’t use overly hot water to wash your face.

 

WHY?  Because hot water can irritate sensitive skin. It can also change the pH of your skin.

 

8.)  Be sure to exfoliate regularly. This means your body as well as your face.

 

WHY?  Because removing dead skin cell layers from the surface of the skin can treat a variety of problems. Exfoliating regularly helps keep your skin smooth. Also, it will ensure your skin care products work effectively as they will be working on the epidermis rather than on the layer of dead skin cells at the surface of the skin. But be careful, too much exfoliation or too rough exfoliation can lead to irritation.

 

9.)  When cleansing or applying products, always remember to go up and out. 

 

WHY?  Because your skin naturally sags as you age, there is no reason to help it along by pulling down on your facial muscles. Moving up and out will help keep your skin firm.

 

10.) Don’t pick at acne lesions.

 

WHY?  Because if the comedone is closed and you squeeze it, it will force the bacteria down into the dermis. The dermis is sterile, so it will spit it back out, often in a much larger area. If it is open, warm compresses will help open the pore and clay masque’s will help clean it out. Be gentle. Force will make it spread and could lead to bruising.

 

11.)  Avoid strss and strive to learn healthy ways to handle stess.

 

WHY?  Because stress plays a major part in our health, which will be reflected by our skin’s appearance. It can lead to increased sebum production. Usually we discover this is true right before a big event when we want to look our best.  Strive to create a stress free environment and life. Taking daily walks help to clear your mind. Make regular trips to the spa for facials and other body treatments. Pamper yourself at home too. Arbonne has a wide selection of aromatherapy and holiday spa products. In our busy lives, we often neglect ourselves. This is counterproductive because if we don’t take care of ourselves, we’ll be ill equipped to take care of others in our life who need us. Be good to yourself!  

 

 

 

12.)  Keep your hormone levels in check.

 

WHY?  Hormone imbalances can lead to many skin problems, including sensitivity, dehydration, acne, hyperpigmentation and microcirculation problems. Two great products to help balance your hormones is Arbonne’s Prolief & Phyto Prolief Natural Balancing Creams.

 

I hope you were able to take a few pointers away with you!

 

Source:  Jesse Rose Harris, Licensed Esthetician

A Better Choice — These DO NOT Belong On Your Skin

March 21st, 2008 by Amy G Unlimited

I have been an Arbonne consultant since January, and I am learning so much about skin care and the products I USED to use. I found this article on a fellow Arbonne International consultant’s website. It is really a NEED to KNOW bit of information!

MINERAL OIL

A mixture of refined liquid hydrocarbons derived from petroleum, mineral oil is the stabilizing ingredient of many skin formulas. Mineral oil forms a film on the skin, blocking the pores and interfering with normal skin respiration. It may,
therefore, not only dry the skin, but be a contributing cause of blemishes.

PETROLEUM
Petroleum products such as vaseline, etc. do not penetrate (PETROL ATUM) the skin, but sit on the surface blocking natural respiration, excretion and absorption of other nutrients.

BEESWAX
Beeswax is a sticky sealant. It attracts pollutants, dirt and bacteria and glues them onto the skin as it seals the pores.

SOLVENT
Many skin care products contain solvent alcohol in the ALCOHOL
form of propyl, isopropyl (petroleum derivatives or SD alcohol-specially denatured ethyl alcohol). These alcohols are very drying to the skin.

LANOLIN
An oily excretion of sheep, lanolin is a common lubricating ingredient in skin formulas. Extracted from the wool, lanolin has been indicated as a cause of allergic skin reactions in sensitive people.

COLLAGEN
An animal product, collagen is added to cosmetics as a moisturizing agent. Collagen molecules are too large to penetrate the skin and can therefore clog pores, and in some cases cause allergic reactions.

ARTIFICIAL
Formulated chemically from a wide variety of sources.

COLORS
Artificial colors are known to cause allergic reactions in some people.

FRAGRANCES
Chemical fragrances have been known to create skin reactions and photosensitivity in some people.

ANIMAL
Animal products are not used in Arbonne Skin Care. Arbonne is cruelty free.

Did you learn anything new? Check your products in your household and see what they have in them. You would be surprised!

Source: http://www.thewiserway.com/html/better-choice.html

Fragrance Lamp Tips

March 2nd, 2008 by Amy G Unlimited

INSTRUCTIONS

1. Set Fragrance Lamp on a level, stable surface. Remove the Decorative/Open Shade and Solid Snuffer Cap.

2. Fill Fragrance Lamp no more than two thirds full with fragrance lamp oil using the small funnel. Dry off any spilt Lamp Oil carefully! NOTE: Your fragrance lamp will not function properly if it is too full!

3. Insert the Wick Stone into the Fragrance Lamp and REPLACE THE SOLID SNUFFER CAP ON THE LAMP.. Allow at least 20 minutes for the Wick Stone to absorb fragrance oil.

4. Make sure the Fragrance Lamp is not near any flammable material. Light the Wick Stone and leave the flame on for 2 at least minutes. (You will get a substantial flame.) Ideally you want the base of the Wick Stone to start glowing red hot. Then blow out the flame. The Wick Stone is now operating. There will be no flame but the burner stone will be very hot!

5. Place the Decorative/Open Shade over the Wick Stone. The Decorative Shade protects you from getting burned on the hot Wick Stone and also helps to hold the heat in the stone. Never put the Decorative/Open Shade on your Fragrance Lamp when the flame is burning.

6. To extinguish, remove the Decorative/Open Shade and place the Solid Snuffer Cap on the Wick Stone.

HELPFUL HINTS & TROUBLESHOOTING

1. ALWAYS KEEP THE SOLID SNUFFER CAP ON THE FRAGRANCE LAMP WHEN IT IS NOT OPERATING. Failure to do so causes most of the wick problems folks encounter. The isopropyl alcohol in the lamp oil tends to evaporate and let the fragrance oil build up in the Wick Stone. Isopropyl alcohol also loves to absorb moisture out of the air, diluting the fragrance lamp oil with water, which means it will not burn! Make sure the Solid Snuffer Cap is on tightly and securely.

2. We strongly suggest you use a fireplace style butane lighter to light your fragrance lamp. They put out a good flame to get the lamp started.

3. Remember that the fragrance lamp works after the flame is extinguished. The flame is only to heat the stone to operating temperature and needs to be blown out after 2-4 minutes.

4. NEVER fill your fragrance lamp more than 2/3 full of fragrance lamp oil. The lamp needs the air at the top of the lamp to work properly and besides that you really do not want the flammable fragrance lamp oil in intimate contact with the hot Wick Stone!

5. Wick Stones usually last about a year or approximately 250 lightings. Wick burners are all different. Some seem to last forever and some don’t seem to last long at all.

6. A patent on wick stones claims that wick stone life is shortened by allowing your lamp to consumer all the fragrance lamp oil in the lamp. It says allowing the lamp to burn 100% of the lamp fuel creates carbon deposits that will plug up the microscopic holes in your wick stone. Others claim a periodic Wick Stone Burnout (burning up all the fuel in your lamp) helps keep your Wick Stone healthy.

7. Some folks advise never leaving fragrance lamp oil in a lamp between uses. This prevents the fragrance oils from building up in the Wick Stone and keeps the alcohol from absorbing moisture out of the air. This is not an absolute must, but is a good idea.

8. Diamondcreek sells replacement Wick Stones. (Unlike some of our competitors, we’re not trying to get rich selling wicks!)


9. You can change fragrances by letting the wick dry on a paper towel. It is okay to go from fragrance to fragrance without drying the Wick Stone, the fragrances will blend until the existing fuel in the wick is used up.

10. If your stone fails to light there are several potential causes

  • The fragrance lamp oil may not be wicked up to the Wick Stone enough yet. Put on the Solid Snuffer Cap back on for another 20 minutes then try again to light your Fragrance Lamp.
  • Your Fragrance Lamp could be “over-wicked”. If your Lamp was left exposed to the air for too long with the Solid Snuffer Cap off, it could buildup fragrance lamp oil in the stone. If so, hold the lighter flame to the stone longer (sometimes it takes several minutes), it should light once the oil deposits are dispersed.
  • Your Wick Stone may have absorbed moisture from the air. The Isopropyl Alcohol in the fragrance lamp oil just loves to absorb water from any source available. Too much water and it will not burn no matter how long you hold a flame to it. In this case, pull the Wick Stone and let it completely dry out for about 24 hours in a warm dry non-humid location.
  • Your Wick Stone’s microscopic pores may be clogged with the deposits that build up over time from combustion. Sometimes this can be fixed by soaking the wick stone in “Unscented – Wick Cleaner”. Soak the wick for an hour or so in the “Unscented – Wick Cleaner” and then put it back in the fragrance lamp and light it right away. Sometimes a Wick Stone can be “rejuvenated” by burning the “Unscented – Wick Cleaner” in the fragrance lamp for a few hours.
  • The Wick Stone may just be all used up. Over time the catalytic metals in the wick get used up or coated with deposits and the wick stone is finished.WHITE SMOKE? Some lamp oil fragrances have a tendency to produce a “white smoke”. The “white smoke” is harmless and results from incomplete combustion of very long chain molecules in some fragrance oils.

    www.diamondcreekcandles.com/f150

  • February Vendor Spotlight

    March 1st, 2008 by Amy G Unlimited

    Congratulations to our February Vendor Spotlight Nominee, Susan Baird! The votes were unanimous, and what is so awesome was that Susan saved us with coming in on a last minute spot to fill in for someone! You always to a wonderful job, Susan, and you are a great asset to our website. Let’s learn more about Susan! (Her answers are in bold)

    Where are you from? Southeast Ohio

    Favorite things to do on your time off? I spend most of my time with my 5 year old son. I also enjoy reading and cooking.

    What companies do you rep for? (please include your link) I am the proud owner of Letters By Design www.LettersByDesign.com

    How long have you been in direct sales? I started in direct sales over 10 years ago and have been active in the online direct sales community for a few years now.

    Have you won any awards for being in direct sales? If so, can you share with us? Not that i know of.

    What is your most gratifying moment of being a WAHM? Opening my own company. This is something that I have wanted to do for a long time.

    Congratulations, Susan! You deserve this recognition hon! I am so happy to have you a part of this site!

    Check out this generous special from Susan!

    Take 10% off your order by using Coupon Code TY10 at checkout at www.LettersByDesign.com